产品特点 FEATURES

1 AC/DC 2-wire proximity sensor (model E2E-X3T1 5M) with M12×P1 threaded cylindrical shielded design

2 Sensing distance: 3mm ±10% (standard detection object: ferrous metals)

3 Power supply compatibility: 24-240VDC (20-264VDC range) / 48-240VAC (40-264VAC range)

4 Environment resistance: Oil-resistant PVC cable (5M length as standard), sensing surface made of cutting oil-resistant material; IP67 protection rating

5 Indicators: Operation indicator (red) and setting indicator (green)

6 Protection functions: Surge suppressor, load short-circuit protection (applicable for 20-40VDC)

7 Response frequency: DC mode 1kHz, AC mode25Hz (average value under standard test conditions)

8 Load parameters: Load current range5-100mA; residual voltage ≤6V (DC,100mA load,2M cable) / ≤10V (AC,5mA load,2M cable)

9 Material composition: Case (nickel-plated brass), sensing surface (PBT), clamping nuts (nickel-plated brass), toothed washer (zinc-plated iron)

使用场景 APPLICATIONS

1 Industrial assembly lines: Detect presence/absence of ferrous metal parts (e.g., screws, bolts, metal components) during production processes

2 Packaging machinery: Count metal packaging containers or detect metal seals on finished packages

3 Material handling systems: Position metal workpieces on conveyor belts or automated guided vehicles (AGVs)

4 Machine tools: Verify tool presence/position in CNC machines or lathes to ensure safe and proper operation

5 Automotive manufacturing: Identify metal body parts or components in assembly stations

6 Food processing equipment: Detect metal parts in processing lines (compliant with IP67 protection for appropriate environments)

7 Electronic device production: Detect metal chassis or parts during assembly steps to maintain production accuracy

注意事项 PRECAUTIONS

1 Installation: Use mounting hole with diameter12.5mm (+0.5/0mm); tighten clamping nuts with appropriate torque (avoid over-tightening) and use the provided toothed washer to prevent loosening

2 Mutual interference: Maintain minimum distance between sensors (face-to-face:30mm, side-by-side:20mm for same frequency; can reduce if using different frequencies)

3 Cable extension: Control output cable can be extended up to200m (with separate metal conduit), diagnostic output up to100m

4 Load requirements: Ensure load current is within5-100mA range; avoid connecting loads with large surge currents (e.g., relays, lamps) directly without additional surge protection

5 Environment: Operate within -25°C to70°C (no icing or condensation); store within -40°C to85°C

6 Safety: Do not short-circuit the load; do not supply power to the sensor without a load to prevent damage

7 Connection: No polarity concern for AC/DC 2-wire connection; load can be connected to either +V or 0V side as needed

E2E-X3T1 5M-PDF数据手册-参考资料